>Welcome to Dezhou Hongxin Machine Tool Co., Ltd.!
Tel.:0534-8122876 中文版
Current Position:Home > Products Center
 
Technical Parameter
 

Deep hole drilling and boring machine T2116

The machine is specialized in machining cylindrical deep-hole workpieces, such as spindle holes for machine tools, various mechanical hydraulic cylinders, cylindrical through-holes for cylinders, blind holes and stepped holes. The processing accuracy can reach IT7~IT8 or above, and the surface roughness can reach Ra0.4μm. The machine tool can not only undertake drilling and boring, but also can perform burnishing , and the internal chip removal (BTA)method is used for drilling. The machine bed is rigid and has excellent precision. The spindle has a wide range of speeds, and the feed system is driven by an AC servo motor, which can adapt to the needs of various deep hole machining processes. The pressure head is fastened and the workpiece is tightly clamped with hydraulic device. The instrument display is safe, stable and reliable. The workpiece has high precision, low waste rate, high efficiency and excellent quality. The adjustment speed is simple and quick, the motor power is small, the cost is low, and the investment is small, which can replace the special machine function


Main technical specifications and performance:


SPECIFICATION

TECHNICAL DATE

T2116B


CAPACITY

Maximum boring diameter

` Boring diameter

φ160mm

Drilling diameter range

Max drilling depth

φ40mm-φ80mm

Maximum boring depth

Max.boring depth

1000-8000mm

Workpiece clamping diameter range

Workpiece clamped dia.range

φ60mm –φ260mm


SPINDLE

Spindle center height

Height from spindle center to bed

320mm

Diameter of main shaft of drill pipe box

Spindle bord diameter

φ65mm

Front end taper hole of spindle

Taper of spindle bore

85mm  1:20

Spindle speed range

Range of spindle bore

200-600r/min   stepless


FEEDS

Feed speed range (stepless)

Feed speed range(infinte)

5-600mm/min  stepless

电机
MOTORS

Main motor power

Main motor poser

7.5KW  n=1440r/min

Motor power of hydraulic pump

Hydraulic pump motor power

1.5KW  n=1440r/min

Feed motor power

Feed motor power

3.7KWAC servo

Cooling pump motor power

Cool pump motor power

4KW  n=960r/min


  OTHERS

Rated pressure of cooling system

Rated prdssure for cooling system

0.36Mpa

Cooling system flow

Flow of cooling system

200L/min

Rated working pressure of hydraulic system

Rated working pressure for hydraulic system

6.3Mpa

Maximum axial force on the pressure head 

Max.axial force for carriage support

68KN

Maximum force of the pressure head on the workpiece

Max.clamping force exalted by carriage on workpiece

20KN

 

  • Address:Deep Hole Industrial Base of Dezhou South Economic Development Zone
  • Tel:0534-8122876
  • Fax:0534-8122877
  • Mobile:13743345588
  • Email:hongxinjichuang@163.com
  • URL:/

© www.dzhxjc.com Deep hole drilling and boring machineDeep hole trampolineDeep hole honing machineCNC deep hole gun drill

XML 地图 | Sitemap 地图